TM 9-4931-374-13&P
INSPECTION
1
ELECTRICAL PLUG CONNECTOR (FEMALE) (1) AND ELECTRICAL
PLUG CONNECTOR (MALE) (2). Check for bent or broken parts.
2
CABLE (3).
a. Check for worn, cracked, or cut insulation.
b. Check for cut or broken wires.
3
TWO GLANDS (4). Check for deformed or deteriorated condition.
REMOVAL
4
TWO GRIPS (5). Check for broken parts.
WARNING
5
TWO DUST COVERS (6). Check for bent
De-energize shop set by
or broken parts.
placing circuit breaker on
power
distribution
panel
6
BAND (7). Check to ensure it is not
connected to power source in
missing and is readable.
OFF
position
and
then
disconnect 120/208V cable
assembly from shelter.
3-325
