TM 9-4931-374-13&P
5
BAND (5).
a. Use marking ink (item 13, app D) to inscribe PART NO. 12011638
on hard to read items.(Letters should be approximately 0.10 in.
(0.25 cm high.)
b. Replace with a new fabricated item (fig. 33, app E) if damaged or
removed.
REASSEMBLY
1
BAND (1). Slip over wire rope (2).
2
TWO TERMINALS (3). Crimp on each end of wire rope (2).
3
BAND (1).
a. Position with 0.50 in. (1.27 cm) between end and one terminal (3).
b. Use heat gun to shrink in place.
4
TAG (4) AND STRAP (5). Assemble and attach to wire rope (2).
3-317
