TM 9-4931-374-13&P
NOTE
Step 2 only needs to be performed at the time of initial
installation or when the right table has been replaced
with a new item.
2
RIGHT TABLE (2). Drill four 0.312-in. (0.792-cm) diameter holes
through table top as illustrated, using four angles (3) as templates.
3
FOUR SCREWS (4). Install.
4
FOUR LOCKWASHERS (5) AND FOUR NUTS (6). Install.
5
TWO ANGLES (7). Push up against ceiling (8).
6
TWO FLAT WASHERS (9), TWO LOCKWASHERS (10), AND TWO
SCREWS (11). Install.
7
FOUR BOLTS (12) AND FOUR NUTS (13). Tighten.
3-265
