TM 9-4931-374-13&P
11
TWO BLIND NUTS (22). If replacement is
WARNING
necessary, remove by drilling out with a
Injury to personnel may result
0.407-in. (1.034-cm) diameter drill.
if pressure is not relieved
before
beginning
any
maintenance on airhose.
NOTE
Steps 12 thru 15 list parts
which
form
airhose
connections on the inside and
outside of shelter wall to left
of personnel door (as viewed
from outside).
All
airhoses
must
be
disconnected
before
disassembling the following
parts.
12
FEMALE COUPLING ASSEMBLY (23). Remove.
13
MALE COUPLING ASSEMBLY (24). Remove.
14
TWO ELBOWS (25). Remove.
15
BULKHEAD ADAPTER (26).
a. Remove nut (27).
b. Remove from shelter pan (28).
c. Replace nut (27) on body (29).
3-33
