TM9-2330-390-14&P
4-113. HYDRAULIC SYSTEM BLEEDING (M1022A1 WITH SIDE LIFT KIT) (Con’t).
3.
Remove dust cap (12) from redundant power quick disconnect coupler (13). Remove redundant power quick
disconnect coupler, preformed packing (14), dust cap, union (front dolly) or straight adapter (15) (rear dolly),
and preformed packing (16) from inlet section of each hydraulic control valve (17). Discard preformed
packings.
4.
Install pipe bushing (18) and pressure gage (19) to inlet section of each control valve (17).
5.
At front and rear, start engine (see paragraph 2-20).
6.
Fill hydraulic reservoirs to top line on dipstick (see paragraph 3-7).
4-317
