TM 9-2330-379-14&P
Section II EQUIPMENT DESCRIPTION AND DATA
Page
Page
Equipment Characteristics,
Location and Description of
Capabilities, and Features....................................... 1-3
Data Plates ............................................. 1-9
Equipment Data....................................................... 1-11
Location and Description of
Major Components.................................. 1-5
EQUIPMENT CHARACTERISTICS, CAPABILITIES, AND FEATURES
Characteristics
The dolly set consists of one front dolly for attaching to the International Standards Organization (ISO) shelter front and
one rear dolly for attaching to the ISO shelter rear.
The dolly set can operate with either a 12- or 24-volt direct current (VDC) electrical system power supply.
The rear dolly has a non-quick release towing pintle assembly.
The dolly set can raise and lower the transportable ISO shelter by means of hand-operated hydraulic pumps and two
hydraulic lift cylinders on each dolly. Provisions are also available to operate the hydraulic pumps from air motors included
with the hydraulic pump assemblies.
The front dolly has a toolbox containing four upper lock pins, four lower lock lugs, four pump handles, one air chuck hose
assembly, two sockets, two strap assemblies, one strong arm, four nuts, two plugs, and two wrenches. The intervehicular
wiring harnesses and air hose assemblies are coiled and secured to both the curbside and roadside of the rear dolly. A
pneumatic hose to be used for connecting the air motors (on the hydraulic pumps) to a suitable air supply is also stowed
on the front dolly.
Capabilities and Features
Towing speed limitations are as follows:
Highway: 55 mph (88 kph)
Cross-country: 15 mph (24 kph)
1-3
