REAR DOLLY AIR RESERVOIRS

REAR DOLLY AIR RESERVOIRS - CONTINUED - TM-9-2330-379-14P_220

TM-9-2330-379-14P Trailer Cargo: 1-1/2-Ton 2-Wheel M105A3 NSN 2330-01-452-1218 Manual
Page Navigation
215

TM 9-2330-379-14&P REAR DOLLY AIR RESERVOIRS This task covers: a. Removal of service brake air c. Installation of parking brake reservoir (page 4-141) (spring brake) air reservoir b. Removal of parking brake (spring (page 4-142) brake) air reservoir (page 4-140) d. Installation of service brake air reservoir (page 4-142) INITIAL SETUP Tools Materials/Parts General mechanics tools set Antiseize tape (item 8, Appendix E) Equipment Conditions Air brake system drained (page 2-2). ACTION LOCATION ITEM REMARKS REMOVAL WARNING The parking brake should be set to ON and the wheels chocked before attempting to remove either rear dolly air reservoir. 1 Spring Single check a. Tag and remove air hoses (5) from brakes air valve (2), 3/8 female cross (4). reservoir reducer hex b. Remove 3/8 female cross (4), reducer (1) nipple (3), 3/8 hex nipple (3), and single check female cross (4) valve (2) from spring brakes air and hoses (5) reservoir (1). 2 Street elbow (6) a. Remove air hoses (7) from street and air hose (7) elbow (6) at other end of spring brake air reservoir (1). 3 Platform Spring brakes air Working through the holes in floor of (19) reservoir (1), platform (19), remove four nuts (9) and two U-bolts (8), four flat washers (10) from two U-bolts four nuts (9), (8) that attach spring brakes air and four flat reservoir (1) to platform (19). washers (10) 4-140

Privacy Statement
Press Release
Contact