TM 9-2330-379-14&P
DETAILED TROUBLESHOOTING - CONTINUED
LOCATION
ITEM
ACTION
Additional probable causes for automatic adjust-
ers not working are:
4. Seals (8) not installed correctly (for example,
4.
Remove seals and
seal element jammed into threads causing bind-
then install the
ing).
seals properly
(page 4-114).
5. Damaged pawl (9) or actuator teeth (10) due to
5.
Properly lubricate
improper lubrication.
and replace pawl in
or actuator as
required (page 4-114).
6. Adjusting pawl springs (11) collapsed or missing 6.
Replace adjusting
(the tension on the spring should check out at
pawl springs (page
approximately 7-1/2 lbs. compressed to 9/16"
4-114).
of an inch).
4-81
