TM 9-2330-379-14&P
STEERING KNUCKLES - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION
11 Steering
Steering arm (17),
a.
Attach steering arm (17) to steering
knuckle (16)
steering arm nut
knuckle (16), and install key (20).
(19), cotter pin
b.
Secure steering arm (17) to steering
(18), and key (20)
knuckle (16) with steering arm nut
(19) and cotter pin (18).
12 Lower arm
Steering knuckle
a.
Place steering knuckle assembly (16),
assembly
assembly (16),
thrust bearing (14), and shims (15), in
thrust bearing
position on lower arm assembly.
(14), shims (15),
b.
Coat inside of bearing surfaces with
knuckle pin (13),
grease and put in knuckle pin (13).
and draw key (20)
Make sure flat portion on knuckle
pin (13) is aligned to draw key (20).
13 Knuckle
Draw key (12) and
a.
Install draw key (12) and tighten.
assembly (16)
draw key nut (11)
b.
Screw in draw key nut (11) and tighten.
14 Knuckle
Gasket (5),
Position steering knuckle cap (4) and
assembly,
steering knuckle
gasket (5) on top of steering knuckle
top side
cap (4), two
assembly (16) and secure with two lockwashers
lockwashers (3),
(3), and two capscrews (2).
and two cap-
screws (2)
4-67
