TM 9-2330-379-14&P
COMPONENT TESTING - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
TESTING HARNESS - CONTINUED
2 Wiring
Harness terminals
a.
Attach one lead of the multimeter to
harness
(1) and (2)
each common terminal (1) and (2) for
the same wire.
If the multimeter indicator does not
indicate zero ohms for every wire, the
harness is bad.
b.
Repeat (a) while bending and twisting
the harness.
If the multimeter indicator fluctuates
(indicating infinite resistance; an
open circuit) for any wire, the harness
is bad.
3 Wiring
Harness terminals
a.
Attach one lead of the multimeter to
harness
(1) and (2)
one terminal (1). Probe all other
terminals (2) with the other lead of
the multimeter.
If the needle of the multimeter
indicates zero ohms for any two
different wires, it indicates that the
harness is shorted.
b.
Repeat (a) while bending and twisting
the harness.
If the multimeter needle indicates zero
ohms, the harness is bad.
c.
Repeat steps (a) and (C) for each
terminal (1).
TASKS END HERE
4-61
