TM 9-2330-379-14&P
COMPOSITE LIGHT
This task covers:
a.
Lamp and lens removal (page 4-52)
b.
Cleaning and inspection (4-52-)
c.
Lamp and lens installation (page 4-53)
INITIAL SETUP:
Tools
Equipment Condition
General mechanics tool set
No special requirements
Materials/Parts
Lamps (as required)
Preformed packing (if required)
Sandpaper, 00
ACTION
LOCATION
ITEM
REMARKS
LAMP AND LENS REMOVAL
1 Composite
Six screws (1)
Unscrew captive screws (1) and remove
light
and door and
door and lens (2).
lens (2)
2 Door and
Preformed
Inspect for damage.
lens (2)
packing (3)
If damaged, remove packing and
throw away.
NOTE
Only remove lamps that do not work.
3 Composite
Four lamps (4)
a.
Push in and turn counterclockwise.
light
b.
Remove lamp.
CLEANING AND INSPECTION
4 Light
Lamp sockets (5)
Inspect for corrosion after lamp is
assembly
removed.
If corroded, clean with 00
sandpaper.
4-52
