TM 9-2330-379-14&P
JUNCTION BOX - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION OF JUNCTION BOX
11 Front adapter
Junction box (1),
Secure junction box (1) to front adapter (26)
(26)
two screws (27),
with two screws (27) and two washers (28).
and two washers
(28)
INSTALLATION OF OTHER COMPONENTS
12 Junction box
Harness and recep-
a.
Carefully route harness attached to
(1)
tacle J1 (22),
receptacle J1 (22) through "J1"
four screws (23),
opening on junction box (1).
four lock washers
b.
Secure receptacle J1 (22) and cover to
(24), and four
junction box (1) with four screws
nuts (25)
(23), four lock washers (24), and four
nuts (25).
13
Receptacle cover
a.
Place gasket (18) over receptacle J2
assembly (16),
(17) and hold in place.
harness and recep-
b.
Carefully place receptacle J2 (17)
tacle J2 (17),
through "J2" opening on junction box
gasket (18), four
(1).
screws (19), four
c.
Secure receptacle cover assembly (16),
lock washers (20),
gasket (18) and harness and recep-
and four nuts (21)
tacle J2 (17) to junction box (1)
using four screws (19), four lock
washers (20), and four nuts (21).
14
Harness (15) and
a.
Install individual harness wires (15)
connector J3 (11)
to proper pins on connector J3 (11).
15
Connector J3 (11),
a.
Carefully place connector J3 (11)
two screws (12),
through "J3" opening on junction box
two lock washers
(1) from exterior of junction box.
(13) and two nuts b.
Secure connector J3 (11) to junction
(14)
box (1) with two screws (12), two
lock washers (13), and two nuts (14).
4-47
