TM 9-2330-275-14&P
4-84. HYDRAULIC HOSES AND FITTINGS REPLACEMENT (M832 SN J089-001 THRU 159
AND J017-160 THRU 350 ONLY) (Con’t).
12.
Remove six nuts (27) and Iockwashers (26), lanyard (25), three spacers (24), and six bolts (21) from bracket
(22). Remove valve assembly from bracket (22) and place on clean surface. Discard lockwashers.
13.
Remove control valve (2) and two needle valves (1 and 3) from two tees (18 and 29) and elbows (23 and 32).
Remove two tees (18 and 29) from connector (28). Remove three self-locking nuts (31) from three valves (1,
2, and 3). Remove three handles (30) from valves (1, 2, and 3). Discard self-locking nuts.
1.
2.
Install two tees(18 and 29) on connector (28). Install elbow (32) on tee (29). Install elbow (23) on control valve
(2). Install three valves (1, 2, and 3) on bracket (22). Install three handles (30) on valves (1, 2, and 3). Secure
handles (30) with three new self-locking nuts (31).
Position valve assembly on bracket (22) and install six bolts (21), three spacers (24), lanyard (25), and six new
Iockwashers (26). Loosely install six nuts (27) on bolts (21). Adjust position of valve assembly as required and
tighten nuts (27).
4-231
