TM 9-2230-275-14&P
4-83. HYDRAULIC HOSES AND FlTTINGS REPLACEMENT (M832 EXCEPT SN J089-001
THRU 159 AND J017-160 THRU 350) (Con’t).
19.
Remove bushing (24) from hydraulic pump (23).
20.
Remove four nuts (35), lanyard (34), four Iockwashers (33), two spacer plates (32), and four bolts (29), and
remove tee (28), nipple (28), and lifting-leveling jack valve (30) assembly from bracket (27). Discard
Iockwashers.
21.
Remove two lifting-leveling jack valves (30) and nipples (28) from tee (28).
NOTE
Perform steps 1 through 10 to install hydraulic hoses and fittings to rear dolly.
Perform steps 11 through 21 to install hydraulic hoses and fittings to front dolly.
1.
Install two nipples (28) and Iifting-leveling jack valves (30) to tee (28).
2.
Install tee (28), nipple (28), and lifting-leveling jack valve (30) assembly to bracket (27) with four bolts (28), two
spacer plates (32), four new lockwashers (33), lanyard (34), and four nuts (35).
3.
Install bushing (24) to hydraulic pump (23).
4.
Install tube (25) to tee (26) and bushing (24).
5.
Install elbow (31) to lifting-leveling jack valve (30).
4-225
