TM 9-2330-275-14&P
440. HYDRAULIC BRAKE LINES AND FlTTINGS REPLACEMENT (Con’t).
NOTE
Perform steps 24 through 26 to remove multiple connector from rear axle of M832.
24.
Loosen two bolts (50) and remove shroud (47) from rear axle (32).
25.
Disconnect brake lines (36 and 36) from multiple connector (37).
26.
Remove bolt (49), lockwasher (46), and multiple connector (37) from rear axle (32). Discard Iockwasher.
b.
INSTALLATION
NOTE
Perform steps 1 through 3 to install multiple connector to rear axle of M832.
1.
Instaii multiple connector (37) to rear axle (32) with new lockwasher (46) and bolt (49).
2.
Connect brake lines (36 and 36) to multiple connector (37).
3.
Install shroud (47) to rear axis (32) and tighten two bolts (50).
NOTE
Perform steps 4 and 5 to install multiple connector to rear axle of M689 and M840.
4.
Install multiple connector (37) to rear axle (32) with bolt (44), new lockwasher (46), and nut (45).
4-106
