TM5-1080-200-13&P
DEFINITION
CODE
Item included in both a depot overhaul/repair kit and a mainte-
KB
nance kit.
Item to be manufactured or fabricated at organizational level.
MO
MF
Item to be manufactured or fabricated at the direct support
maintenance level.
Item to be manufactured or fabricated at general maintenance
MH
support level.
Item to be manufactured or fabricated at depot maintenance
MD
level.
Item to be assembled at organizational level.
AO
AF
Item to be assembled at direct support maintenance level.
AH
Item to be assembled at general support maintenance level.
Item to be assembled at depot maintenance level.
AD
XA
Item is not procured or stocked because the requirements for
the item will result in replacement of the next higher assembly.
XB
Item not procured or stocked. If not available through salvage,
requisition.
A support item that is not stocked. When required, item will be
XD
procured through normal supply channels.
NOTE
Cannibalization or salvage may be used as a source of
supply for any items coded above except those coded XA
and support items restricted by AR 700-42.
(2) Maintenance Code. Maintenance codes are assigned to indicate
the levels of maintenance authorized to USE and REPAIR support
items. The maintenance codes are entered in the third and fourth
positions of the Uniform SMR Code format as follows:
(a) The Maintenance Code entered in the third position will indi-
cate the lowest maintenance level authorized to remove,
replace, and use the support item. The maintenance code
entered in the third position will indicate one of the following
levels of maintenance.
