TM 10-9925-100-12&P
0005 00
PACKING THE CC CONTENTS, CONTAINING TWO ECUs, NO ASH, NO TQG
Pack the CC components into the container as shown in the following illustrations. Secure the items with
tie down straps where appropriate. After the container is loaded, close and secure the doors.
WARNING
The CC container weighs approximately 16,500 lbs when packed. Lift
and move the container only with material handling equipment of at least
17,000 lbs capacity. If a forklift is used, use the forklift pockets. Observe
all safety precautions. Never stand under a CC container while it is being
lifted.
Using a 17,000 lbs (minimum) forklift or other lifting device, move the CC to a position near the packaged
items. Open the end doors.
STEP 1
1. Pre-position 6 tiedown straps (1), 3 on each side of the container, approximately where shown.
2. Place the ten Type I footlockers (2) at the far end of the container.
3. Stand one chair box (3) upright and slide it in between the container wall and the footlockers.
4. Place three chair boxes (4) on the long side as shown, on top of the low stack of footlockers
1
2
3
4
0005 00-60
