ARMY TM 10-8340-224-13
AIR FORCE TO 35E5-6-1
NAVY NAVFAC-P-337.A
SECTION I
2-1. GENERAL.
DESCRIPTION AND USE OF OPERATOR’
INDICATORS
The TEMPER has been designed for
S CONTROLS AND
use in forward
combat areas and has relatively few moving parts.
Electrical
controls are found on the electrical distribution boxes for the
power control system and on the light set as described in
paragraph 2-2 below.
2-2. OPERATOR’S CONTROLS AND INDICATORS. Refer to table 2-1.
Figure 2-1.
ELECTRICAL DISTRIBUTION BOX CONTROLS
Table 2-1 Electrical Distribution Box Controls
Control or Indicator
Function
On/Off Switch
(1)
Turns left or right bank
electrical circuits on or
off.
Circuit Breakers (2)
Provides overload or short-
circuit protection. Circuit
is interrupted when breaker
is out. Push to reset.
2-2
