ARMY TM 10-8340-224-13
AIR FORCE TO 35E5-6-1
NAVY NAVFAC-P-337.A
(2) Install Hinge Assembly.
(a)
Install screws and nuts (4) to mount hinge assembly
(5) to door (1).
(b)
Install rivets/screws (2) and hinge cover plate (3)
on door (1) IAW TC 9-510 as applicable.
(c)
Install door (1) as described in paragraph 5-13a.
5-14. REPAIR POWER CONTROL, TYPE III/IV AND CONVENIENCE OUTLET.
This task covers: a. Remove and install circuit breaker, toggle
and push-pull.
b. Remove and install receptacle connector with
gasket from Power Control/Convenience
Outlet.
c. Remove and install mounting box receptacle
from Power Control/Convenience Outlet.
INITIAL SETUP
Tools:
Tool Kit, Common No 1 (Appendix B, Section III, Item 7)
Materials/Parts:
Circuit breaker, toggle (TM 10-8340-224-23P, Figure 22, Item 14;
Figure 23, Item 11)
Circuit breaker, push-pull (TM 10-8340-224-23P, Figure 22, Item
15; Figure 23, Item 12)
Connector, receptacle with gasket (TM 10-8340-224-23P, Figure 22,
Item 7,8; Figure 23, Item 7,8; Figure 24, Item 3)
Receptacle, Mounting Box (TM 10-8340-224-23P, Figure 22,
Item 10,11; Figure 23, Item 10; Figure 24, Item 5)
Equipment Condition:
External Electrical power disconnected; Power control
disconnected.
5-9
