TM 10-8340-222-10
CHAPTER 3
MAINTENANCE INSTRUCTIONS
Section I. LUBRICATION INSTRUCTIONS
The slide fasteners are the only items on the tent which
require lubrication. When the sliding member of the
fastener is difficult to move, apply stick form lubricant
(FSN 9150-999-7548) to the metal slides of the
fasteners.
Section II. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
3-1. General
Preventive maintenance checks and services are the
minimum inspections which are performed daily to insure
that defects may be discovered and corrected before
they result in serious damage to or failure of the
equipment. When defects are discovered during
operation / use of the equipment, they must be corrected
as soon as operation / use has ceased. If continued
operation / use would result in damage to the equipment,
the defects must be corrected at once. All deficiencies
and shortcomings that are discovered and all action that
is taken will be recorded on DA Form 2404 as soon as
possible.
3-2. Preventive Maintenance Checks and Services.
The preventive maintenance checks and services listed
in table 3-1 will be performed in the sequence in which
they are numbered.
3-1
