ARMY TM 10-8340-211-13
AIR FORCE TO 35E5-1-101
5-8. Stovepipe Opening Shield (cont).
Cut stitching of binding and tie tape on inside of tent (figure 2-7), retain serviceable components
for later installation, then remove and discard damaged shield.
Position serviceable shield on panel opening inside tent, then position tie tapes and binding and
machine sew in place with same type stitch used in original construction.
Position flaps, tie tape, and drip cap on outside of tent, then machine sew with same type stitch
used in original constructions.
Compound coating. When necessary, fabric repair patches and seams may be coated with compound
MIL-C-13295, type 1 (para. 4-19), as a safeguard against mildew or leaks.
Figure 5-1. Stovepipe Opening Shield.