TM 10-8340-208-13
factors and then only at the depot maintenance category. Rebuild reduces to zero the hours or miles the equipment, or
component thereof; has been in use.
d. Tools and Equipment, Column (4). This column is provided for referencing by code the special tools and test
equipment, (sec. III) required to perform the maintenance functions (sec. II).
e. Remarks, Column (5). This column is provided for referencing by code the remarks (sec. IV) pertinent to the
main-tenance functions.
B-3. Explanation of Columns in Section III
a. Reference Code. This column consists of a number and a letter separated by a dash. The number references
the
T and TE requirements column on the MAC. The letter represents the specific maintenance function the item is to be
used with. The letter is representative of columns A through K on the MAC.
b. Maintenance Level. This column shows the lowest level of Maintenance authorized to use the special tool or test
equipment.
c. Nomenclature. This column lists the name or identification of the tool or test equipment.
d. Tool Number. This column lists the manufacturer's code and part number, or Federal Stock Number of tools and
test equipment.
B-4. Explanation of Columns in Section IV
a. Reference Code. This column consists of two letters separated by a dash, both of which are references to section
II. The first letter references column (5) and the second letter references a maintenance function, column (3), A through
K.
b. Remarks. This column lists information pertinent to the maintenance function being performed, as indicated on
the MAC, section II.
B-2
