TM 10-7360-209-13&P
APPENDIX G
ILLUSTRATED LIST OF
MANUFACTURED ITEMS
G-1. INTRODUCTION.
This appendix includes complete instructions for making items authorized to be manufactured or fabricated at the unit
maintenance level and direct support maintenance level.
A part number index in alphanumeric order is provided for cross-referencing the part number or the item to be
manufactured to the figure which covers fabrication criteria.
All bulk material needed for manufacture of an item are listed by part number or specification number in a tabular list on
the illustration.
G-2. MANUFACTURED ITEMS PART NUMBER INDEL
PART NUMBER OF MANUFACTURED ITEM
APPLICABLE FIGURE
GASKET
G-1
G-3. GENERAL INSTRUCTIONS.
The manufacture of gasket consists of following:
1.
REPLACING TOP/BOTTOM ICE CHEST GASKET. Lay out a piece of new gasket materiel and cut to the length
and pattern shown in Figure G1. Use the gasket retainer to align and drill holes in gasket.
2.
REPLACING ICE CHEST SIDE GASKET. Lay out a piece of new gasket materiel and cut to the length and
pattern shown in Figure G1. Use the gasket retainer to align and drill holes in gasket.
Change 3 G-1
