TM 10-5411-224-14
6-5.
PERSONNEL DOOR HINGE.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools:
General Mechanics Tool Kit (Item 1, Appendix B)
Riveting Tool (Item 3, Appendix B)
Safety Glasses (Item 8, Appendix B)
Materials/Parts:
Hinge (Appendix F, Figure F-4)
Cotter Pin (Item 22, Appendix E)
Blind Fastener (Item 29, Appendix E)
Alcohol, Isopropyl (Item 7, Appendix E)
Cloth, cotton (Item 3, Appendix E)
Gloves, rubber (Item 11, Appendix E)
Sealer (Item 19, Appendix E)
Conductive Sealer (Item 30, Appendix E)
REMOVAL
1.
Open shelter door.
2.
Remove cotter pin (1) from chain and pin assembly (2) and remove pin from door stop bracket (3) and door
brace (4).
3.
Remove four screws (5) securing hinge (6) to shelter.
WARNING
Drilling creates metal chips which may enter eyes and cause serious injury. Eye protection is required.
CAUTION
Make sure the drill bit has a drill stop attached to prevent the drill bit from exceeding a depth of one inch.
4.
Drill out four rivets (7) securing hinge (6) to door and remove hinge (6) and shim (8).
6-2
