REPAIR OF SHELTER PANEL DENT

REPAIR OF SHELTER PANEL PUNCTURE - NO CORE DAMAGE.

TM-10-5411-224-14 Lightweight Multipurpose Shelters (LMS) Model No. S-78B/G Type I and Type III & 5411-01-357-3683 Manual
Page Navigation
63

TM 10-5411-224-14 5-6. REPAIR OF SHELTER PANEL DENT - continued. NOTE Make sure that the area is completely clean. Do not touch the area with hands or any item that may leave an oily residue. 2. Wear rubber gloves and use a clean cotton cloth with alcohol and clean the entire surface. 3. Fill the dent with body filler using a putty knife or other flat-edge implement and smooth the surface evenly to a feathered edge. 4. Allow the resin to set thoroughly (approximately 1 hour depending on ambient air temperature) in accordance with manufacturers recommendations. 5. Sand the repaired area to a flat, smooth finish. 6. Prime and paint the repaired surface in accordance with paragraph 3-7. Figure 5-8. Repair of Shelter Panel Dent 5-15

Privacy Statement
Press Release
Contact