Skid Assembly (cont) - TM-10-5411-205-13

Skid Assembly (cont) - TM-10-5411-205-13_83

TM-10-5411-205-13 Shelter Electrical Equipment S-250/G (Unshielded) (NSN 5411-00-999-4935) (Shielded) (NSN 5411-00-189-6076) Manual
Page Navigation
74

TM 10-5411-205-13 3-33. Skid Assembly (cont). (2) Position each noseplate (10 and 11) in place over each plate (12) and secure to plate (12) and shoe (13) with 16 rivets (9). (3) Place spring (6) under skid plate (7) and secure with four rivets (4) and two rivets (5). (4) Push each skirt (1) in mounting grooves noseplate assembly (3). Align grooves of upper plate assembly (2) with top flange of skirts (1) and push in place. d. Install. (Figure 3-35) NOTE Coat the shafts and undersides of heads of screws and bolts com- pletely with sealer before installing. (1) Position each skid assembly (2) and two rubber blocks (6) in place under shelter and secure to underside of floor panel with 12 phillips head screws (5). (2) Secure skid assembly (2) to side panel of shelter with 24 phillips head screws (4). (3) Position each plate (4) Apply a continuous shelter panels. (3) in place and secure with three hex-head screws (1). bead of sealer around all mating edges of skid assembly and 3-65

Privacy Statement
Press Release
Contact