TM 10-5411-201-14
T.O. 35E4-178-1
4-22.
HINGED SIDEWALL REPLACEMENT AND REPAIR.
This task covers:
a.
Removal
d.
Repair
b.
Disassembly
e.
Assembly
c.
Cleaning, Inspection
f.
Installation
INITIAL SETUP
Special Tools
Materials
Hand blind riveter, Appendix B, Item 2
Adhesive, Item 1, Appendix E
Snap ring pliers, Appendix B, Item 10
Adhesive, Item 2, Appendix E
Installation tool, Appendix B, Item 3
Adhesive, Item 3, Appendix E
Installation tool, Appendix B, Item 14
Sealant, Item 18, Appendix E
Electric drill, portable,
Sealing Compound, Item 19,
Appendix B, Item 6
Appendix E
Standard Tools
Spray Lubricant, Item 25,
General mechanics tool kit
Appendix E
Personnel - 4
1 Electrician
Equipment Condition
Closeout and ECU panels removed from
hinged sidewalls
NOTE
The following procedures apply to left and
right hinged sidewalls.
REMOVAL
Hinged Sidewall
W A R N I N G
The shelter contains voltages that are dangerous if
contacted.
Before removing or installing electrical
cables or components, make certain electrical power
is completely disconnected from circuit involved.
Support cables must be locked out prior to removal
of hinged sidewall.
NOTE
Remove only those electrical components that will
interfere with removal of a particular panel.
4-96
