Figure 2-11. Water outlet panel with hose assemblies attached

Figure 2-10. Water box interior connection and sump installation

Figure 2-12. Operation of airlock door handles and anti-backdraft valve

TM-10-5410-221-10 Shelter Expandable Rigid Construction With Air-Lock (Zero Manufacturing Corp. Model SEU-2) FSN 5410-833-8387 Manual
Page Navigation
52

TM 10-5410-221-10 Figure 2-11. Water outlet panel with hose assemblies attached. Section IV. OPERATION UNDER USUAL CONDITIONS 2-19. General a. The instructions in this section are published for the information and guidance of personnel responsible for operation of the expandable shelter. b. The operator shall be familiar with the operation of all of the components and fixtures of the expandable shelter. This section provides instructions for operation of the various components and fixtures of the expandable shelter and for coordinating the basic motions to perform the specific functions for which the shelter is designed. Since nearly every job presents a different problem the operator may have to vary given procedures to fit the individual job. 2-20. Operation of Components and Fixtures a. Air-lock Door. Operation of air-lock door handles and adjustment of anti-backdraft valves on doors is shown and described in figure 2-12. b. Shelter Doors. Operation of shelter doors is shown and described in figure 2-13. c. Blackout Curtains. Operation of blackout curtains is shown and described in figure 2-14. d. Conditioned Air Plenums. Operation of conditioned air plenums is shown and described in figure 2-15. e. Electrical Circuit Breakers and Components. For operation of electrical circuit breakers and components, refer to chapter 2, section III. f. Leveling Jacks. Leveling jacks will be maintained at a level position under all conditions to prevent damage to the shelter. 2-47

Privacy Statement
Press Release
Contact