M1070 HET ARMOR KIT
II113400
Rev. D
2. Install right mine blast panel assembly as follows (see Figure 3-64):
NOTE
This operation requires significant teamwork and communication in order to
properly align and position the slots and holes in the right mine blast panel
assembly.
a. Place right mine blast panel assembly under vehicle using a forklift or other suitable lifting device.
b. Align slots in right mine blast panel assembly with all previously installed brackets and raise right mine
blast panel assembly into place.
c. Secure right mine blast panel assembly to vehicle with 12 flat washers (1) and locknuts (2) and
12 socket-head shoulder bolts (3), flat washers (4), and lock washers (5). Torque locknuts (2) to 23 lb-ft
and socket-head shoulder bolts (3) to 9 lb-ft.
d. Secure right mine blast panel assembly to doghouse right panel with four bolts (6), eight flat washers (1),
and 4 lock nuts (2). Torque the locknuts to 35 ft-lb.
NOTE
Ensure all 12 socket-head shoulder bolts are installed before tightening the locknuts.
INSTALLATION 3-124
JUNE 2005
