TB 9-2320-360-13&P-2
WINDSHIELD BALLISTIC GLASS AND WINDSHIELD ARMOR REPLACEMENT - CONTINUED
0017 00
INSTALLATION - CONTINUED
10.
Install two windshield clamp brackets (16), eight washers (17), and new locknuts (18) on windshield center post.
11.
Install five washers (21), bolts (22), washers (20), and new locknuts (19) on windshield clamp brackets (16).
16
17
18
19
20
21
417-212
22
WARNING
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can cause lung irritation.
Contact with skin can cause dermatitis. Wear gloves and safety goggles and use product in a well-ventilated
area away from open flame. If ingested, keep individual calm and seek medical attention. DO NOT induce
vomiting. If contact with skin or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW
local policy and ordinances. Failure to follow this warning may cause injury to personnel.
12.
Apply sealant to outside opening of windshield armor.
0017 00-11
