TB 9-2320-360-13&P-2
WINDSHIELD BALLISTIC GLASS AND WINDSHIELD ARMOR REPLACEMENT - CONTINUED
0017 00
REMOVAL - CONTINUED
9.
Remove 30 locknuts (24) and washers (25) from windshield armor (27). Discard locknuts.
10.
Install two lifting links (23) on center of windshield armor (27).
11.
Attach sling and lifting device to lifting links (23).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death to per-
sonnel.
NOTE
Windshield armor weighs 143 lb (65 kg).
12.
Using lifting device, remove windshield armor (27) from vehicle.
13.
Remove five locknuts (28), washers (29), and stud plate (30) from windshield armor (27). Discard locknuts.
14.
Remove sling, lifting device, and lifting links (23) from windshield armor (27). Discard locknuts.
15.
Remove trim seal (26) from windshield frame.
23
24
25
30
(HIDDEN)
28,29
27
26
417-211
0017 00-5
