TB 9-2320-360-13&P-2
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0009 00
LOCATION
ITEM TO
CHECK/
ITEM
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
PROCEDURE
CAPABLE IF:
3
Before
Side Armor
a. Inspect side armor panels and door Any side armor panel or door assembly
assembly for damaged, loose, or is damaged or mounting hardware is
(Left Side)
missing mounting hardware.
loose or missing.
b.Inspect exterior surface of door ballis- Cracks, scratches or pitting in the exte-
tic glass for cracks, scratches, or pit- rior layer of door ballistic glass that pen-
etrates through to the inner layer.
ting.
c. Open door and enter cab. Close door Door binds or does not latch or lock.
using grab handle. Lock door with
lock pin. Make sure door closes prop-
erly and locks correctly (WP 0004
d.Make sure door ballistic glass can Door ballistic glass will not close or
open, close, and securely lock.
lock.
e. Inspect interior surface of door ballis- Cracks, scratches, or pitting on the inte-
tic glass and windshield ballistic glass rior surface of the door ballistic glass or
for cracks, scratches, or pitting.
windshield ballistic glass.
f. If dirty, clean door ballistic glass (WP
g.Inspect seat armor for damage, loose, Seat armor is damaged or has loose or
or missing armor plate or missing missing mounting hardware.
bolts.
CAB SIDE
(REAR) ARMOR
CAB SIDE
(FRONT) ARMOR
DOOR
ARMOR
DOOR
BALLISTIC GLASS
417-149
0009 00-3
