Installation Manual P/N 0257550622-00
Freightliner M915 / M916 -
(Doc No.: II113500-1 D)
Crew Protection Kit
Fasteners:
Find No.
Description
Size
Quantity
3
Bolt
5/16" x 1" NC
14
2
Bolt
5/16" x 3/4" NC
6
6
Bolt
5/16" x 1-1/2" NC
2
14
Bolt
3/8" x 1-3/4" NC
6
27
Flat washer
5/16" x 30 x 3
6
26
Flat washer
5/16" x 21 x 3
16
29
Flat washer
3/8" x 21 x 3
12
38
Flange Nut
3/8 NC
6
Special Tools/ Materials
Description:
Vendor/Part-Number:
Sika Primer
206
Sikaflex Sealant
265 or 296
5.16.2 Installation Instructions
IMPORTANT
Before installation, clean the windscreen rim and all relevant parts with mild detergent.
Spread a layer of primer on the relevant surfaces. Before parts installation, spread a
generous amount of Sikaflex on the adjoining side of all parts, on screws, and in all
screw holes, to prevent water and moisture from entering the cabin.
IMPORTANT
The ballistic windshield can be easily fractured by improper installation. Do not tighten
fasteners until all components are in place. Snug all fasteners slowly, check for any
interference, correct as necessary, then tighten. Do not allow the Sikaflex sealant to
cure before completion of the installation and tightening of the fasteners.
Page 75 of 125
