TM 9-4931-374-13&P
CONVERSION TABLE
IN.
CM
NOTES
4.00
10.16
1.
All dimensions shown are in inches. A dimension with a two-digit
0.50
1.27
decimal has a tolerance of +0.06 (+0.15 cm) and a three-digit
0.188
0.477
decimal has a tolerance of +0.010 (+0.025 cm).
0.410
1.041
1.000
2.540
2.
Fabricate from metal sheet, aluminum, NSN 9536-00-232-7599.
18.00 45.72
10.500 26.670
3.
Break all sharp edges and deburr all holes.
3.00
7.62
0.340
0.860
WARNING
0.750
1.905
Use only type 1.1.1 trichloroethane solvent. Never use
16.380
41.605
solvent unless ventilation is provided. Breathing
3.75
9.53
solvent vapors will cause unconsciousness, prolonged
0.38
0.97
skin contact with solvent will cause irritation, and
0.81
2.06
taking solvent internally will cause vomiting.
4.
Degrease with type 1.1.1 trichloroethane (item 20, app D).
5.
Apply one coat zinc chromate primer coating (item 16, app D),
followed by two coats semigloss OD enamel (item 8, app D).
6.
Mark with black stencil marking ink (item 13, app D) as follows.
P/N 12011676
E-5