TM 9-4931-374-13&P
3-10. SHOP SET--ELECTRICAL INSTALLATION--MAINTENANCE INSTRUCTIONS (cont)
REASSEMBLY (cont)
49 RACEWAY. (cont)
c. Position on right table (89) with entrance
end fitting (88) at cargo door end.
d. Install two screws (90), two washers
(78),
and
two
nuts
(77).
NOTE
Perform the procedure in step
50 using harness assembly
with ends of eleven wires
taped together.
50 HARNESS ASSEMBLY (91).
a. Pull through blank end fitting (87) of
raceway (86).
b. Pull through 29.12-in.
(73.96-cm)
flexible conduit (92).
3-92