TM 9-2330-390-14&P
5-11.
HYDRAULIC POSITIONING CYLINDER REPAIR (M1022A1 WITH SIDE LIFT KIT)
(Con't).
5.
6.
Install new O-ring (12) on rod assembly (7).
Assemble new expander (15) new seal (14), and two new wear rings (2 and 13) on piston (4). Position gaps of
wear rings approximately 180° opposite each other.
7.
Install piston (4) with assembled components on rod assembly (7).
8.
Install new locknut (1) on rod assembly (7) and tighten securely.
9.
Remove rod assembly (7) from vise. Install barrel assembly (3) in vise.
5-51