TM 9-2330-390-14&P
5-37
5-10.
HYDRAULIC LIFT CYLINDER REPAIR (M1022A1 WITH SIDE LIFT KIT) (Con't).
1.
Rotate stop ring (12) counterclockwise until
end of square retaining ring (13) can be seen
in milled slot (17). Reverse rotation of stop ring
and back out square retaining ring through
milled slot. If end of square retaining ring inter-
feres with edge of milled slot, use a screw-
driver to bend up square retaining ring to clear
slot.
2.
Rotate stop ring (12) one full turn and remove
square retaining ring (13).
CAUTION
Use caution not to score piston tube assembly.
3.
Slide stop ring (12) forward on piston tube assembly (6) and remove round ring (11).
4.
Remove stop ring (12), packing set (9), and gland cap (5) from piston tube assembly (6). Discard packing
set.