TM 9-2330-390-14&P
5-1.
FRONT OR REAR AXLE ASSEMBLY REPLACEMENT (Con’t).
3.
4.
Place a wooden block under midpoint of axle assembly (5) at attachment point to pivot axle bracket (9).
Remove four safety pins (8) nuts (7) bolts (2) bottom lockout bracket (3) four sleeves (4) and top lockout
bracket (8) from each end of axle assembly (5) and pivot axle bracket (9).
5.
Remove setscrew (12) nut (11), washer (10), and pivot bolt (13) from axle assembly (5) and pivot axle bracket
( 9 )
6.
Pull on drawbar (1) to separate axle assembly (5) from pivot axle bracket (9).
7.
Continue to pull on drawbar (1) to remove axle assembly (5). Support axle assembly on wooden block.
8.
Remove safety chains (front axle assembly) (see paragraph 4-51).
9.
Remove drawbar (1) (see paragraph 4-53 or 4-88).
10.
Remove pintle assembly (rear axle assembly) (see paragraph 490).
1.
install pintle assembly (rear axle assembly) (see paragraph 4-90).
2.
install drawbar (1) (see paragraph 4-53 or 4-88).
3.
4.
install safety chains (front axle assembly) (see paragraph 4-51).
Use drawbar (1) to guide axle assembly (5), supported on a wooden block, into position on pivot axle bracket
(9).
5-2
