TM 9-2330-390-14&P
4-138. STORAGE BOX REPLACEMENT.
This Task Covers:
a.
Removal
b.
installation
initial Setup:
Materials/Parts:
l
Adhesive (item 1, Appendix F)
l
Four locknuts
Tools/Test Equipment:
l
General mechanics tool kit (item 30, Appendix G)
1.
Open storage box (2) and remove contents.
2.
Remove four locknuts (6), fiatwashers (7), cap-
screws (4), fiatwashers (3) and storage box (2)
from two mounting brackets (1). Discard lock-
nuts.
3.
if seal (5) is damaged, remove.
NOTE
Ensure that seal mounting surface on cover is
clean and dry.
1.
If removed, install seal (5) with adhesive.
NOTE
Hinged side of storage box should be installed
facing pivoting tray.
2.
Install storage box (2) on two mounting brackets
(1) with four flatwashers (3), capscrews (4), flat-
washers (7), and new locknuts (6).
3.
Place contents in storage box (2) and close.
Change 1 4-399