TM 9-2330-390-14&P
4-129. REGULATOR REPLACEMENT (Con't).
3.
If damaged, remove flange bolt (7) and stay (2)
from crankcase (6).
1.
If removed, install stay (2) on crankcase (6) with flange bolt (7).
2.
Install regulator (4), wiring harness ground wire (5), and two flange bolts (1) on stay (2).
3.
Connect wiring harness connector (3) to regulator (4).
Follow-on Tasks:
Connect negative (-) ground cable to battery (see paragraph 4-45).
4-381