TM 9-2330-390-14&P
Change 4 4-243
4-93.
FRONT DOLLY HYDRAULIC CONTROL VALVE BRACKET REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
• Hydraulic control valve removed (see paragraph 4-
108).
• Marker clearance light removed (see paragraph 4-
38).
• Reflector removed (see paragraph 4-104).
Materials/Parts:
• Five locknuts
Tools/Test Equipment:
• General mechanic's tool kit (Item 30, Appendix G)
1.
Remove five locknuts (3), flatwashers (4), cap-
screws (1), flatwashers (1.1), and bracket (2)
from brace (5). Discard lockouts.
2.
If damaged or if replacing bracket (2), remove
data plates (see paragraph 4-105).
1.
If removed, install data plates (see paragraph
4-105).
2.
Install bracket (2) on brace (5) with five flat-
washers (1.1), capscrews (1), flatwashers (4),
and new lockouts (3).
Follow-on Tasks:
•
Install reflector (see paragraph 4-104).
•
Install marker clearance light (see paragraph 4-38).
•
Install hydraulic control valve (see paragraph 4-108).
a.
REMOVAL
b.
INSTALLATION
1.1
1.1
