TM 9-2330-390-14&P
Section IX. WHEEL, BRAKEDRUM, AND TIRE MAINTENANCE
Paragraph
Number
Paragraph Title
Page
Number
4-75.
4-76.
Hub, Brakedrum, and Wheel Bearings Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . .
Wheel and Tire Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-191
4-197
4-75.
HUB, BRAKEDRUM, AND WHEEL BEARINGS MAINTENANCE.
This Task Covers:
a.
Removal
d. Assembly
b.
Disassembly
e.Installation
c.
Cleaning and Inspection
f. Wheel Bearing Adjustment
Initial Setup:
Equipment Conditions:
Materials/Parts:
l Brakes caged (rear dolly) (see paragraph 4-56).
l Tire and wheel removed (see paragraph 4-76).
l Crocus cloth (Item 6, Appendix F)
l Grease (Item 19, Appendix F)
l Rags (Item 25, Appendix F)
l Dry cleaning solvent (Item 27, Appendix F)
l One O-ring
l One seal
Tools/Test Equipment:
l General mechanics tool kit (Item 30, Appendix G)
l Socket wrench set, ¾ in. drive, wheel bearing
(Item 38, Appendix G)
l Torque wrench, 0-175 lb.-ft. (Item 42, Appendix G)
l Suitable lifting device
References:
l TM 9-214
l Eight lockwashers
Personnel Required: Two
General Safety Instructions:
l Dry cleaning solvent is flammable and must not be
used near an open flame. Use only in a well-venti-
lated area.
4-191