TM 9-2330-390-14&P
4-60.
SPIDER ASSEMBLY REPLACEMENT (Cont).
c .
INSTALLATION
NOTE
On front dolly, spider is mounted to steering knuckle spindle.
1.
install spider (18) on axle spindle (15) with eight sockethead capscrews (19), new lockwashers (17), and nuts
(16).
2.
Install two hold-down clips (8) on top and bottom of spider (18) with two new lockwashers (7), bolts (6), and
nuts (9).
3.
Install two dust shields (11) on spider (18) with four new lockwashers (12) and capscrews (13).
4.
5.
6.
Install four plugs (14) on two dustshields (11).
Fill cavity inside plunger housing (3) with grease to a level just below the airbrake chamber seat.
Aline tabs of wedge assembly (10) with keyway slots in plunger housing (3). Install wedge assembly and push
In to seat. Ensure that wedge assembly moves starwheels (5) when applied.
4-134