TM 9-2330-390-14&P
4-34.
SIGNAL CONDITIONING BOX REPAIR (Con't).
1.
Loosen two screws (6) and open cover (3) of signal conditioning box (5).
2.
Disconnect wires (1) from 12-volt receptacle connector (2) and wires (1) from 24-volt receptacle connector (4)
(see paragraph 4-26).
Remove four nuts (12), lockwashers (1 1), capscrews (9) receptacle cover (8), and 24-volt receptacle
connector (4) from cover (3). Discard lockwashers.
3.
4.
Remove two nuts (14), lockwashers (13) capscrews (7), and 12-volt receptacle connector (2) from cover (3).
Discard lockwashers.
2
4-50