UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES - CONTINUED
ITEM TO BE INSPECTED
PROCEDURE: CHECK FOR AND HAVE REPAIRED, FILLED,
REPLACED, OR ADJUSTED AS NEEDED
WHEELS AND TIRES
Rotate and match tires according to tread design and degree of wear (refer to
Inspect wheel for damage or deformation. Using a torque wrench, tighten
lugnuts to 450-500 lb ft.
Check suspension for bent or cracked parts, loose mountings, or worn bushings.
Check shock absorbers for secure mountings, damages, or leakage.
Check condition of shock absorbers rubber mountings and bracket. Tighten
loose mounting hardware on shock absorbers.