SERVICE UPON RECEIPT OF MATERIAL - CONTINUED
Drycleaning solvent PD-680 is both toxic and flammable. Avoid prolonged breathing of vapors and
avoid skin contact. Use only in well ventilated area and keep away from open flame. Flash point
of solvent is 138°F (58.8°C). Serious injury or death could result.
Remove rust preventive compound with dry
Inspect for damage that may have
occurred during shipping.
If damage is found, submit DD Form
6, Package Improvement Report.
Check against equipment to see if
shipment is complete.
Report all discrepancies in accordance
with instructions in DA PAM 738-750.
PRELIMINARY SERVICING AND ADJUSTMENT OF EQUIPMENT
Perform the operator and unit preventive maintenance checks and services contained in chapters 2
Lubricate all points as shown in the Lubrication Chart (page 4-2) regardless of interval.
Schedule the next preventive maintenance checks and services on DD Form 314, Preventive
Maintenance Schedule and Record.
Report all deficiencies on DA Form 2407 if the deficiencies appear to involve unsatisfactory design.
Perform a break-in road test of 25 miles (40.23 km) on new or reconditioned materiel, or a sufficient
number of miles on used materiel to completely check operation.