TM 9-2330-379-14&P
PREPARATION FOR USE - CONTINUED
8.
Remove the lower bolts (9) attaching front dolly adapter. Stop attempt to remove lower bolts if more force
than the use of a bolt as a punch is required.
9.
Check the alignment of the adapters. Both adapters should be resting on the ground with no tension.
10.
Adjust the dolly casters (1) to obtain sufficient ground clearance to allow dolly to roll. Insert breaker bar
(strong arm) (10), as shown, and apply pressure to nut (11), while turning the top of the screw (123) with
wrench from tool box.
2-28