2-11. ATTACHlNG DOLLY SET TO SHELTER (Cont).
(30) Remove caster assemblies (10) from front dolly half. Install caster assemblies (10) to mounting -
brackets on rear dolly (1) and secure with two pins (11). Rotate bearing post (45) clockwise to secure caster wheel
(44) against suspension bar (25).
. Drawbar is heavy (120 pounds). Use two persons when lifting or lowering drawbar.
Failure to do so may result in damage to shelter and injury to personnel.
l When raising drawbar to vertical position, exercise care and control. Failure to do
so may result in damage to shelter and injury to personnel.
For the M832 (SN J089-001 thru 159 and J017-160 thru 350), skip to step 48.
(31) Raise drawbar (6) to vertical position and secure with quick-release pin (50).