TM 9-2330-275-14&P
4-36. HANDBRAKE LEVER AND CABLE REPLACEMENT (Cont).
9.
b.
INSTALLATION
NOTE
Make sure slot of link engages pin of lever.
1.
Install brake actuating lever (7) and link (29) with two screws (25), washers (26), slotted nuts (27), and new
cotter pins (28).
2.
Feed end (8) of handbrake cable (12) through hole in backing plate (6).
3.
Connect end of handbrakecable (12)to link (13) of handbrake Iever assembly (14) with pin (24), washer (15),
and new cotter pin (16).
4.
Install new plug (5) in other backing plate hole, if plug was discarded.
5.
Install spacer, cable clamp (21), and two spacers (22) on handbrake Iever assembly (14). Install two bolts
(23) to
4 - 8 4