Entrance Way/Window Wall Liner. The entrance way/ window wall liner (Figure 10, Item
constructed similar to the plain wall liner except that it contains an approximately 6 foot -inch high and
3-foot wide door. A quick release male fastener is located on the upper, inside edge of the door and a
quick disconnect female fastener in corresponding location on the liner. A strip of 1-inch pile fastener is
located along the left side and along the top of the liner door opening. A strip of 1-inch hook fastener is
sewn to the outer edge and top of the door. In addition seven quick release female fasteners are located
on the outside along the door opening. Three entrance way wall/window wall liners are issued with each
Type I MCPS.